General

Does the TAP switch plate come with screws?
Yes the TAP switch plate comes with 2 screws. The switch plate also has holders for the screws to prevent loss when removing the plate for decoratin...
Mon, 29 Jul, 2019 at 10:49 AM
Can I paint over the back plate?
Yes you can paint over the back plate if you want to make the switch appear thinner, but it should only be a thin layer of paint around the edge other...
Mon, 29 Jul, 2019 at 10:51 AM
Can the TAP range be used in the bathrooms or wet rooms?
No, the TAP range should only be used in dry environments, the TAP range should not be used in high-humidity environments (i.e. bathrooms, sauna’s, stea...
Mon, 29 Jul, 2019 at 10:56 AM
Can I use the TAP range outside?
No, the TAP range is not waterproof and is therefore not suitable for outdoor use
Mon, 29 Jul, 2019 at 10:57 AM
How thin is the TAP range?
The TAP range is really thin at 4.7mm 
Sat, 25 Feb, 2017 at 11:09 AM
Does the TAP range work with Non UK back boxes?
There are two options for mounting your TAP-5 you can either mount it on a UK backbox when mounted on a UK backbox it sits flush with the wall. You can also...
Sat, 25 Feb, 2017 at 11:08 AM
Can I connect two digital outputs together, so they trigger the same digital input?
Yes our switch plates are designed that so you can connect multiple digital outputs from one or more TAP switch plates to the same digital input. This can b...
Tue, 30 Jul, 2019 at 7:51 AM
Can the TAP range be used in wet rooms?
No, the TAP range should only be used in dry environments, the TAP range should not be used in high-humidity environments (i.e. wet areas of bathrooms, saun...
Tue, 30 Jul, 2019 at 7:52 AM
Do our Faradite plates work with Loxone?
Yes, the TAP switch plates work well with Loxone systems. You can connect the TAP switches to digital inputs on the Miniserver, Extension, Dimmer extension ...
Tue, 30 Jul, 2019 at 12:54 PM
Do you make custom finishes?
 No, you can see the range of finishes that we offer at https://www.faradite.com/collections/tap-5
Tue, 30 Jul, 2019 at 7:54 AM